PENENTUAN RUTE TRANSPORTASI DENGAN METODE SAVING MATRIX PADA PG MADUKISMO, YOGYAKARTA

Ika Putri Rahmasari, Pandi Pardian

Abstract


Increasing sugar mill productivity one of them is done by making improving the process of cutting and transportation sugarcane from the land until the sugar mill. PG Madukismo has implemented that sugarcane cutting and hauling pattern to fulfill raw material in the mill however that's not running well because it is still based on the sugarcane cutting schedule of each region, therefore, this study is conducted on based on sugarcane transportation activities. The goal of this study was to determine the optimum transportation route in the process of transporting sugarcane raw materials to PG Madukismo. This study uses saving matrix analysis. Results of this study showing that the vehicles used are 222 and 4 groups of transportation areas to provide a saving distance of 373.9 Km

Keywords


Sugarcane; Saving Matrix; Routes, Transportation; Madukismo

References


Badan Pusat Statistik. (2017). Produksi Komoditi Indonesia. Jakarta

Creswell, J.W. (2009). Research Design: Qualitative, Quantitative, and Mixed Methods Approaches. Newbury Park: Sage Publication.

Direktorat Jendral Pertanian. (2017). Outlook Tanaman Pangan dan Hortikultura. Jakarta: Direktorat Jendral Hortikultura Kementrian Pertanian Indonesia.

Hakim, A. (2006). Manajemen Industri. Yogyakata: CV. Andi Offset

Heizer, J., dan Render, B. (2010). Manajemen Operasi. Buku 2. Edisi 9. Jakarta: Salemba Empat.

Herjanto, E. (2007). Manajemen Operasi. Edisi 3. Jakarta: PT. Grasindo.

Lincoln, G. (1985). Naturalistic Inquiry. Edition 1. Beverly Hills: Sage Publication.

Arifin, B. (2008). Ekonomi Swasembada Gula Indonesia. Economic Review 211(211):1–12.

Ananda, M. S., Sukmawati, A., Syamsun, M., & Ali, A. (2016). Pengembangan Model Peningkatan Kompetensi Pekerja Domestik Indonesia di Malaysia, Journal of Technology Management, 15(3), 262–278. http://doi.org/10.12695/jmt.2016.15.3.4

Hudori, M. dan Madusari, M. (2017). Penentuan Rute Angkutan Tandan Buah Segar (TBS) Kelapa Sawit yang Optimal dengan Metode Saving Matrix. Jurnal Citra Widya Edukasi, 9(1) 25-39.

Kurniawan, I.E. and Purwono. (2018). Tebang, Muat dan Angkut di Wilayah PG Madukismo, Yogyakarta. Buletin Agrohorti, 6(3): 354-361.

Rushton, Alan, Phil Croucher, and Peter Baker. (2006). The Handbook of Logistics and Distribution Management. Project Management Journal, 40:664.

Sutaryanto, T. (2009). Pentingnya Peningkatan Mutu Tebu. Jurnal Gula Indonesia, 33(2): 60-71.

Thoriq, A. dkk. (2017). Studi Siklus Waktu Proses Muat Angkut Tebu Secara Mekanis di PG jatitujuh, Majalengka, Jawa Barat. Jurnal Teknologi Pertanian, 11(1): 62-67.

Nitiadiwidojo, T. (1984). Pelaksanaan Proyek Panduan Siprab Tahun Giling 1983 di PG Tulangan. Preceedings Diskusi Teknis dan Ilmiah. Pasuruan: Balai Penelitian Perusahaan Perkebunan Gula. Pp 166.

Harison, G.I. 2012. Sistem Penunjang Keputusan Penjadwalan Transportasi Angkut Tebu (Studi Kasus PG, Rajawali IIi Unit Jatitujuh, Majalengka). Institut Pertanian Bogor. Bogor.




DOI: http://dx.doi.org/10.25157/ma.v6i2.3410

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Mimbar Agribisnis: Jurnal Pemikiran Masyarakat Ilmiah Berwawasan Agribisnis

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

___________________________________________________________________________________

Diterbitkan Oleh :

Fakultas Pertanian Universitas Galuh

Jl. RE Martadinata No. 150 Ciamis 46274

Telepon: 0265-7602739

Email: mimbaragribisnis@gmail.com

 

Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.

 __________________________________________________________________________________

Mimbar Agribisnis: Jurnal Pemikiran Masyarakat Ilmiah Berwawasan Agribisnis diindeks oleh: